Alamo 7191852C, Operator'S Manual

Page: 49 / 110

ASSEMBLY
PA91 03/09 Assembly Section 3-9
© 2009 Alamo Group Inc.
ASSEMBL
Y
OIL REQUIREMENTS
Tank
The machine is delivered from the factory without oil. Fill the reservoir with a light hydraulic oil as
recommended in the chart until the oil level is approximately 2” below the top of the tank. The total capacity is
approximately 117 tires (25 gallons). Do not overfill. The oil must have anti-frothing characteristics suitable for
use in hydraulic systems.
Gearbox
Check the gearbox oil level. On level ground, gearbox should be filled until oil is in visible level with the lip of
the filler plub aperture. Do not attempt to fill by removing the breather as the depth of tapped thread in the
casing is insufficient to allow repeated loosening and tightening of the breather plug at this point.
The gearbox capacity is 700 milliliters (1-1/4 pint), use EP 90 gear oil.
Supplier Cold or Temperature Climate Hot Climate
Castrol Agricastrol hydraulic oil
Hy-spin AWS32 Hy-spin AWS68
Shell Tellus 32 Tellus 68
Mobil D.T.E. 25 D.T.E. 26
Esso Nuto “H” or “A” 32 Nuto “H” or “A” 68
Texaco Rando HD 32 Rando HD 68
Gulf Hydrasil 32 Hydrasil 32
B.P. Energal HLP 32 Energal HLP 68
Dalton Silkolene Dove 32 or
Derwnet 32 Silkolene Dove 68
Elf Hydrelf 32 Hydrelf 68
ISO VG 32 68
SAE 10W 20