TO THE OWNER/OPERATOR/DEALER
All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who
recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to
be used with all its safety equipment properly attached to minimize the chance of accidents.
BEFORE YOU START!!
Read the safety messages on the implement and shown in your manual.
Observe the rules of safety and common sense!
WARRANTY INFORMATION:
Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form
in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card
and on the Warranty Form that you retain. The use of "will-fit" parts will void your warranty and can cause
catastrophic failure with possible injury or death.
RED
RED
002369
*
*
LOCK UP.
LOCK UP.
5. TRANSPORT SAFELY,
5. TRANSPORT SAFELY,
6. USE SMV, LIGHTS, &
6. USE SMV, LIGHTS, &
REFLECTORS.
7. DO NOT OPERATE WITH
7. DO NOT OPERATE WITH
MOWER OR WING RAISED.
MOWER OR WING RAISED.
8. DO NOT MOUNT OR
8. DO NOT MOUNT OR
DISMOUNT WHILE MOVING.
DISMOUNT WHILE MOVING.
4. BLOCK UP SECURELY
4. BLOCK UP SECURELY
BEFORE WORKING UNDER.
BEFORE WORKING UNDER.
3. USE SAFETY SHOES,HARD
3. USE SAFETY SHOES,HARD
HAT, SAFETY GLASSES,
HAT, SAFETY GLASSES,
SEAT BELTS, & ROPS.
SEAT BELTS, & ROPS.
2. NO RIDERS, NO CHILDREN
2. NO RIDERS, NO CHILDREN
OPERATORS.
1.
MANU
AL
READ
Never mount or dismount a moving vehicle. Crushing from runover may cause injury or death.
Never mount or dismount a moving vehicle. Crushing from runover may cause injury or death.
Put tractor in park or set brake, disengage PTO, stop engine, remove key, and wait until noise of rotation has ceased
Put tractor in park or set brake, disengage PTO, stop engine, remove key, and wait until noise of rotation has ceased
to prevent entanglement in rotating parts which may cause injury or death.
to prevent entanglement in rotating parts which may cause injury or death.
8. Before dismounting, secure flail mower in transport position or lower to ground.
8. Before dismounting, secure flail mower in transport position or lower to ground.
7. Never operate with Flail Mower or Folding Section raised if passersby, bystandards or traffic are in the area to reduce
7. Never operate with Flail Mower or Folding Section raised if passersby, bystandards or traffic are in the area to reduce
possibility of injury or death from objects thrown by Blades under Shields or implement structure.
possibility of injury or death from objects thrown by Blades under Shields or implement structure.
6. Make certain that SMV sign, Warning Lights, and Reflectors are clearly visible. Follow local traffic codes.
6. Make certain that SMV sign, Warning Lights, and Reflectors are clearly visible. Follow local traffic codes.
Install
Restrictor in folding circuit to slow down lowering and unfolding if action is faster than is desirable.
Install
Restrictor in folding circuit to slow down lowering and unfolding if action is faster than is desirable.
5. Before transporting, put Lift Lever in detent or full-lift position. Install Transport Safety Devices securely on folding
5. Before transporting, put Lift Lever in detent or full-lift position. Install Transport Safety Devices securely on folding
implements. Slowdown when turning and on hillsides.
implements. Slowdown when turning and on hillsides.
4. Block up or support raised machine and all lifted components securely before putting hands or feet under or working
4. Block up or support raised machine and all lifted components securely before putting hands or feet under or working
underneath any lifted component to prevent crushing injury or death from sudden dropping or inadvertent operation of
underneath any lifted component to prevent crushing injury or death from sudden dropping or inadvertent operation of
controls. Make certain that area is clear before lowering or folding.
controls. Make certain that area is clear before lowering or folding.
3. Operate only with tractor having Roll-Over Protective Structure (ROPS) and with seatbelt fastened securely and
3. Operate only with tractor having Roll-Over Protective Structure (ROPS) and with seatbelt fastened securely and
snugly to prevent injury and possible death from falling off or tractor overturn. Personal Protective Equipment such as
snugly to prevent injury and possible death from falling off or tractor overturn. Personal Protective Equipment such as
Hard Hat, Safety Glasses, Safety Shoes, and Ear Plugs are recommended.
Hard Hat, Safety Glasses, Safety Shoes, and Ear Plugs are recommended.
2. Allow no children on or near implement of tractor. Allow no riders on tractor or implement. Falling off can cause
2. Allow no children on or near implement of tractor. Allow no riders on tractor or implement. Falling off can cause
serious injury or death from being runover by tractor or mower or contact with Flail Mower Blades.
serious injury or death from being runover by tractor or mower or contact with Flail Mower Blades.
Learn how to stop engine suddenly in an emergency. Be alert for passersby and especially children.
Learn how to stop engine suddenly in an emergency. Be alert for passersby and especially children.
1. Study and understand Operator's Manuals, Safety Signs, and Instructional Decals for tractor & flail mower to prevent
1. Study and understand Operator's Manuals, Safety Signs, and Instructional Decals for tractor & flail mower to prevent
misuse, abuse, & accidents. Practice before operating mower in a confined area or near passersby.
misuse, abuse, & accidents. Practice before operating mower in a confined area or near passersby.
FAILING TO FOLLOW SAFETY MESSAGES AND OPERATING INSTRUCTIONS CAN CAUSE
FAILING TO FOLLOW SAFETY MESSAGES AND OPERATING INSTRUCTIONS CAN CAUSE
SERIOUS BODILY INJURY OR EVEN DEATH TO OPERATOR AND OTHERS IN THE AREA.
SERIOUS BODILY INJURY OR EVEN DEATH TO OPERATOR AND OTHERS IN THE AREA.
DANGER
Summary of Contents for 02986941P
