ALADIN ALADIN AIR Z, Operating Manual, Page: 80 / 86

80
1 Maintenance of Aladin
®
Air Z Dive Computer
IX Uwatec ® Aladin ® Air Z
Your Aladin
®
Air Z is virtually maintenance free. All you need to do is to rinse it carefully with fresh water
after each use and to have the batteries changed when needed. To avoid possible problems with your
Aladin
®
Air Z, the following recommendations will help assure that it will give you years of trouble free
service:
• Avoid dropping or jarring your Aladin
®
Air Z.
• Do not allow your Aladin
®
Air Z to be exposed to direct, intense sunlight.
• Rinse your Aladin
®
Air Z thoroughly with fresh water after each dive.
• Do not store your Aladin ® Air Z in an air-tight area; make sure there is free ven-
tilation.
• If there are problems with operating the contacts, the surface of your Aladin ®
Air Z housing can be treated with silicone grease. Use soapy water to clean the
Aladin
® Air Z before using silicone grease and dry it thoroughly.
• Never pressure the Aladin ® Air Z out of water.
• There are borings in two of the contacts for the reception of the PC interface
connection (MemoMouse). Free these borings from dirt with a needle if neces-
sary.
Take the dive computer or the transmitter to an authorized retailer in order
to change the batteries. The actual change of the batteries is made at the
manufacturer or the importer. The computer is checked for its technical fun-
ctioning at the same time. Do not attempt to have the batteries changed by
anyone other than an authorized dealer.
WARNING