Alacritech Accelerator Users Guide
3-15
Link Speed & Duplex
– This option allows for the direct setting of
the data transmission rate. The default for this setting is Auto
Detect. The available options for this setting are shown in the
following table:
Setting Description
10Mbps Full Duplex
(copper-based products
only)
Sets data rate to a maximum of 10
megabits per second bi-directionally
10Mbps Half Duplex
(copper-based products
only)
Sets data rate to a maximum of 10
megabits per second unidirectionally
100Mbps Full Duplex
(copper-based products
only)
Sets data rate to a maximum of 100
megabits per second bi-directionally
100Mbps Half Duplex
(copper-based products
only)
Sets data transmission rate to a maximum
of 100 megabits per second
unidirectionally
1000 Mbps Full
Duplex
Sets data transmission rate to a maximum
of 1000 megabits per second bi-
directionally
Auto Detect
The controller will detect the optimum
data transmission rate for a given
connection
The default value for Link Speed & Duplex is
Auto Detect
.
TCP Checksum Offload
– The TCP Checksum Offload option will
allow the Accelerator to offload the TCP checksum for TCP data