50
6.2 Audio Setup
This is guide for setting audio output of MG-350SHD. You can use Stereo or Digital 5.1 ch.
9
Analogue/DCPM: Select when you connect the supplied audio cables (Red / White) to TV or Audio set directly.
9
Encoded Digital: Select when you want to listen through 5.1Ch / DTS Dolby by connecting receiver (or amplifier) with Optical or Coaxial cable.
< Setup Procedure >
①
Turn on MG-350SHD and press [SETUP] on Mode
Selection screen.
Move to ‘
②
Audio Out’ icon and press [OK]. Setup box will be
displayed under icon menu.
③
Select Audio Out Mode out of Stereo or Encoded Digital.,
and then press [OK].
Finally, press [SETUP] again for saving configurations.
④
Summary of Contents for MediaGate MG-350SHD
