AL Tech MediaGate MG-350SHD, User Manual

Page: 19 / 81

18
1) After installing the driver, connect MG-350SHD and plug
power cable. And then, check the driver installation at
Windows [Start > Settings>Control Panel > System >
Device Manager > Hard disk controllers > Hi-Speed USB-
IDE Bridge Controller].
2) Check ‘My Computer’ or ‘Explorer’, there should be a new
volume. You can copy any data to this volume.
3) After copying data, remove MG-350SHD with using
remove icon at Windows right-down corner. If you
don’t follow this procedure, data and MG-350SHD may have
damage.
1.3 Copy Data via USB
It is possible to use as a external USB hard disk drive in case of inserting hard disk into MG-350SHD. You can copy data from your
PC to built-in HDD of MG-350SHD via USB. It is possible to play media files at the hard disk on TV set.
* When connecting PC, you have to connect power cable of MG-350SHD.
1.3.1 Windows 98SE
9 First, you have to install Windows 98 Driver before connecting PC. Find the driver at Windows 98 driver CD>MediaGate MG-
350SHD>English>Windows 98 Driver Directory. After finishing installation, Connect MG-350SHD to PC via USB cable, and plug power cable of MG-
350SHD.
9
If a new volume is not be appeared, check HDD format or not,
and HDD file system. Windows 98SE only detect FAT32 file
system.