AL Tech Mediagate MG-250HD, Manual

Page: 29 / 49

3.2 Audio Setup
This is
a
guide for setting
the
audio output of
the
MG-250HD. You can use Stereo or Digital 5.1 ch.
9 Analogue/DCPM: Select
this
when you connect the supplied audio cables (Red/White) to
a
TV or Audio
equipment
directly.
9
Encoded Digital: Select
this
when you want to listen through 5.1Ch/DTS Dolby by connecting receiver (or amplifier) with Optical or Coaxial cable.
< Setup Procedure >
①
Turn on
the
MG-250HD and press [SETUP] on
the Remote
control.
.
Move to
②
[Audio Out] icon and press [OK]. Setup box will be
displayed under icon menu.
③
Select [Audio Out] Mode of
either
Stereo or Encoded Digital.,
and then press [OK].
Finally, press [SETUP] again
to
sav
e the
configuration.
④
28