Fault-Finding plan
456251_a
21
FAULT-FINDING PLAN
Fault
Possible cause
Remedy
Motor won't start
no mains voltage
check fuse
mains cable / plug
coupling faulty
check (electrical expert)
replace
Housing not closed as required
- safety switch in operation.
Close housing as required and
screw down firmly.
blade disc blocked
Remove any shreddings from in-
side the housing (Attention! Re-
move mains plug).
Reduced cutting performance
blunt blades
Regrind blades or replace with
new ones.
CAUTION!
Electrical repairs should only be carried out by a qualified electrican or authorized service agent!
WARRANTY
We will address claims for any defects in materials and workmanship during the statutory period of limi-
tation by means of repairs or replacements of our choice. The period of limitation is governed by the laws
of the country in which the machine was purchased.
Our warranty applies only if:
The machine has been properly handled
The operating instructions have been adhered
to
Original replacement parts have been used
The warranty is no longer in effect if:
Efforts have been made to repair the machine
Technical modifications have been made to the
machine
The machine has not been used for its intended
purpose
The warranty does not cover:
Damage to paint work through normal use
Parts subject to wear as indicated in the replacement parts list with a box
[
xxx xxx (x)
]
Internal combustion engines – separate warranty conditions of the respective engine manufacturer
apply
The warranty period begins with the purchase by the first buyer. The warranty period begins on the date
that appears on the original purchase receipt. In the event of a warranty claim, please your contact supp-
lier or the nearest authorised customer service centre with this warranty declaration and the purchase re-
ceipt in hand. This warranty does not affect the legal warranty claims by the purchaser against the seller.
