2
Removal of AL-KO Sensabrake Mouse gain slide
and fitting of a cover to disallow adjustment.
If there is a requirement to remove the ability to adjust the gain on the mouse of
the AL-KO Sensabrake then the following steps should be carefully followed.
1. After installing the AL-KO Sensabrake in accordance with the fitting
instructions, and initializing the control system, check that the brake
performance is as required before deciding to remove the ability to alter the
output via the mouse gain slide.
2. Having set the mouse gain slide at the required position be extremely careful
DO NOT to move the gain slide control during this procedure. (Fig 1)
3. Remove the 4 screws which secure the top cover to the mouse
bottom.
(Fig 2)
4. This will uncover the gain slide control and the adjustment arm.
DO NOT allow the arm to be moved from its original position. (Fig3)
FIGURE 1
FIGURE 2
FIGURE 3
QUALITY FOR LIFE
Figure 1
Figure 2
Figure 3
