1
FIGURE 1
FIGURE 2
FIGURE 3
QUALITY FOR LIFE
Mouse Gain Slide RemovalInstructions
Printed November 2009
Page 1: ...1 FIGURE 1 FIGURE 2 FIGURE 3 QUALITY FOR LIFE Mouse Gain Slide Removal Instructions Printed November 2009 ...
Page 2: ...ol system check that the brake performance is as required before deciding to remove the ability to alter the output via the mouse gain slide 2 Having set the mouse gain slide at the required position be extremely careful DO NOT to move the gain slide control during this procedure Fig 1 3 Remove the 4 screws which secure the top cover to the mouse bottom Fig 2 4 This will uncover the gain slide con...
Page 3: ...trim pot and may require gentle pressure using small pliers to remove it Any rotational movement of the adjusting arm will alter the previously set brake performance setting Remove the mouse gain slide Fig 4 6 Reassemble the mouse top and refit the 4 screws leaving the gain slide and adjustment arm out of the assembly Fig 5 7 Fit AL KO part number 350258 Cover to the front of the Mouse into the sl...
Page 4: ... cover to disallow adjustment FIGURE 1 FIGURE 2 FIGURE 3 QUALITY FOR LIFE The process is now complete Please note that any future requirement to adjust the performance of the braking system will require the mouse top to be removed and the trim pot adjusted manually ...
