GB
18
MH 2500 Slice
Product description
2.2
Legends and signal words
DANGER!
Denotes an imminently danger-
ous situation which will result in fatal or serious
injury if not avoided.
WARNING!
Denotes a potentially danger-
ous situation which can result in fatal or serious
injury if not avoided.
CAUTION!
Denotes a potentially dangerous
situation which can result in minor or moderate
injury if not avoided.
IMPORTANT!
Denotes a situation which can
result in material damage if not avoided.
NOTE
Special instructions for ease of un-
derstanding and handling.
3
PRODUCT DESCRIPTION
3.1
Intended use
The machine is intended for the shredding of
twigs and branches from trees and bushes with a
maximum diameter of 40 mm.
This trailer is intended solely for use in non-com-
mercial applications. Any other use (as well as
unauthorised conversions or add-ons) are re-
garded as contrary to the intended use and will
result in exclusion of the warranty as well as loss
of conformity (CE mark); the manufacturer will
thus decline any responsibility for damage and/or
injury suffered by the user or third parties.
P40: continuous operation with interruptions
The appliance can be operated continuously but
with regular interruptions at high loads. If it is op-
erated for too long at high loads, the overload
protection switches the appliance off. The appli-
ance has been tested and approved for operation
at full load for 40 s followed by an idling time of
60 s.
3.2
Possible foreseeable misuse
■
The machine is not intended for commercial
use or in agriculture and forestry.
■
Do not use the machine in rainy weather.
■
The safety devices on the machine must not
be dismantled or bypassed.
3.3
Residual risks
Even during correct use of the appliance, there is
always a certain residual risk that cannot be ex-
cluded. Depending on the use, the following po-
tential risks can be derived from the type and
construction of the appliance:
■
Injuries from flying cuttings
■
Injuries due to inhaling cutting particles
■
Injuries due to reaching into the shredder
mechanism
■
Injuries due to the machine tipping over
3.4
Symbols on the machine
Symbol
Meaning
Pay special attention when handling
this attachment!
Read the operating instructions be-
fore starting operation!
Keep hands and feet away from the
shredder mechanism!
Keep other people out of the danger
area!
Maintain a safety distance!
Always disconnect the machine
from the mains before maintenance
or if the cable is damaged or cut.
Switch off the engine before starting
any work on the appliance.
Wear protective glasses and ear
defenders.
Summary of Contents for MH 2500 Slice
