AL-KO HWA 1001 INOX, User Instructions

Page: 14 / 134

Your domestic water system is susceptible to low
temperatures. Make sure to empty the device of
residual liquid (hoses, pump and reservoir) and
store it so that it is protected from frost. •
If the pump runs trouble-free, put it into
operation as described in the instructions.
Removing and mounting of non-return
valve, cleaning (HWA 1300 F)
•
Empty the suction and pressure hoses.
•
Remove the filter (see Section "cleaning the
filter").
•
Remove the draining screw (6) and (7) (HWA
1300 F) drain all water from the pump cham-
ber.
•
Unscrew the non-return valve (21) and clean
it under flowing water.
•
Replace the draining screw and store the
device so that it is protected from frost.
•
Renew seal (22) if necessary.
•
Install the non-return valve.
•
Install the filter and filter cover.
Frost protection
Disposal
RL 2002/96 EG
Do not dispose of worn-out units through the household garbage!
The appliance, its packaging and accessories are all produced from recyclable
materials and must be disposed of accordingly.
GB 5
Translation of original user instructions