AL-KO HT 18V Li, Operating Instructions Manual, Page: 15 / 189

Product overview
440109_a 15
Wear protective glasses and
ear defenders.
Remove the battery before any
adjustment or cleaning of the
equipment is made or when the
device is left unattended for a
while.
PRODUCT OVERVIEW
The product overview (1) provides an overview of
the appliance.
1-1 Blade
1-2 Screws for fastening the handguard
1-3 Handguard
1-4 Front hand grip with switch
1-5 Spirit level
1-6 Rear hand grip with switch
1-7 Battery with battery lock
1-8 Charger with mains plug
1-9 Clamping bolt
1-10 Blade cover
1-11 Operating instructions
HT 18V Li
Blade
length
510 mm
Cutting
thickness
15 mm
Total
weight
2,8 kg
Vibrations
measured
at hand
grip *
4,8 m/s
2
K ± 1,5 m/s
2
Insulation
class
/ III
Stroke
rate at no
load
2200 min
-1
Noise le-
vel
LpA 90 dB(A) ± 2 dB(A)
Battery type lithium ion
Voltage 18 V
Battery
rating
1,3 Ah (lithium ion)
Charging
time
200 min
Run time
per bat-
tery
appr. 25 min.
Battery charger
Charging
current
Input: 100-240V~50/60Hz 14W
Output: 20V 500mA
Allowable
charging
tempera-
ture range
5 - 45 °C
Technical data
Technical data acc. to the following standards:
sound pressure and sound energy level acc. to
DIN EN ISO 3744
Measurement of mechanical vibration at the hand
grip acc. to EN 28662-1
ADVICE
The specified values have been establis-
hed based on a standardised test pro-
cess and can be used for comparing dif-
ferent electrical tools with one another.
In addition, these values are suitable for
estimating in advance the loads to which
the user is exposed due to vibration.