AL-KO EasyMow 700, Manual

Page: 37 / 80

Repair
456785_a 37
Renewing the cutting blades
1 Switch off the robotic lawn mower (3-7).
2 Put down the robotic lawn mower with the cut-
ting blades pointing upwards.
3 Unscrew the screws (2-11) with a 5.5 mm
spanner.
4 Pull the cutting blades (14-5) out of the blade
seat.
5 Clean the blade seat with a soft brush.
6 Insert new blades and screw tight with the
screws.
➯
As a rule, the clearer blades do not need
to be renewed.
In case of stubborn dirt that cannot be removed
with a brush, the blade plate (13-3) must be rene-
wed because an imbalance can lead to increased
wear and malfunctions.
ADVICE
Damage due to an incorrect repair!
If cutting blades are damaged and bent,
they are not allowed to be straightened.