AL-KO EASYAIR RO-01, Installation And Operating Manual

Page: 54 / 76

Installation and Operating Manual (translation)
54
AL-KO EASYAIR
®
IMPORTANT
The specified values must be adhered to, otherwise the plate heat exchanger may be damaged.
NOTE
To remove stubborn dirt, cleaning agents can also be used (e.g. all-purpose cleaner, biode-
gradable).
It must then be rinsed using plenty of fresh water!
Do not use aluminium cleaners! These are acidic and attack the surface of the plate heat
exchanger.
8.4.4 Multi-leaf dampers
WARNING
Risk of crushing
When closing the multi-leaf damper, there is a risk of crushing injuries to the hands.
„
Do not reach into the damper when closing the multi-leaf damper.
„
Wear the personal protective equipment.
8.4.4.1 Maintenance
„
Inspect the multi-leaf dampers for soiling, damage and corrosion.
„
Check the mechanical function of the multi-leaf dampers.
„
Check the end position of the damper adjustings actuators and adjust, if necessary.
„
Lubricate the damper bearing and joints if necessary using appropriate lubricants.
8.4.4.2 Cleaning
„
Clean the multi-leaf dampers at regular intervals.
8.4.5 Droplet eliminator
WARNING
Risk of cuts
There is a risk of cutting injuries during cleaning and maintenance of the droplet eliminator!
„
Wear personal protective equipment (cut-proof gloves)!
8.4.5.1 Maintenance
„
The droplet eliminator can be pulled out laterally from the housing for maintenance purposes.
„
Inspect the droplet eliminator for soiling, damage and corrosion.
„
Check water drain and siphon of the drain tray and top up if necessary.
8.4.5.2 Cleaning
„
The droplet eliminator can be pulled out laterally from the housing for cleaning purposes.