AL-KO EASYAIR RO-01 Installation And Operating Manual Download Page 51

Page: 51 / 76

Subject to changes in line with technical progress.

Servicing and maintenance

3313737

8.4.2 Rotary heat exchanger

WARNING

Risk of injuries.

Before repair and maintenance work, disconnect the EASYAIR

from the mains on all

poles and secure to prevent restart.

WARNING

Risk of cuts

During maintenance and cleaning of the heat exchanger there is a risk of cuts!

Wear personal protective equipment (cut-proof gloves)!

8.4.2.1 Maintenance

IMPORTANT

To avoid bearing damage, the thermal mass must be rotated periodically (monthly) in the

event of a prolonged standstill.

IMPORTANT

Check seals before commissioning.

Check drive elements and control elements.

The respective manufacturer documentation of the rotor manufacturers must be ob-

served.

Summary of Contents for EASYAIR RO-01













































































Search results

Summary of Contents for EASYAIR RO-01

Reviews:

Brands by name

Popular brands

AL-KO EASYAIR RO-01, Installation And Operating Manual

Search results

Summary of Contents for EASYAIR RO-01

Reviews:

Brands by name

Popular brands