AL-KO COMBI-CARE 38 E comfort, Translation Of The Original Instructions For Use

Page: 18 / 180

18
Translation of the original instructions for use
Water ingress can cause irreparable damage to the
motor and the safety pushbutton switch.
„
Clean the machine after each use (scraper, cloth,
etc.).
Remove the blade shaft (08)
1. Unscrew and remove the screw (1) of the bearing.
2. Fold up the bearing half (2).
3. Lift the blade shaft out of the lower bearing half
and pull it out of the drive side (3).
Install in reverse order.
Remove the blades (09)
Before removing the blades, check their instal-
lation position!
1. Unscrew and remove the hexagon bolt (1).
2. Carefully pull the ball bearing (2) off the shaft (8).
3. Pull the thrust ring (3), washer (4) and short
spacer tube (5) off the shaft.
4. Pull off the blades (6) and long spacer tubes one
after another.
Install in reverse order.
Removing the aerator roller
Remove the aerator roller and renew the steel spring
tines in the same way as the blade shaft.
Help in case of malfunction
Malfunction Help
Motor does not
start
„
Check the power cable and
the residual-current circuit
breaker
„
Push the operator presence
control towards the top han-
dlebar.
„
Select a lower working depth.
Shaft does not
rotate
„
Select a lower working depth.
„
Clear the blades
„
Contact a customer service
workshop
The motor loses
power
„
Select a lower working depth.
„
Renew worn blades.
„
Clean the housing
„
Mow the lawn (grass is too
long).
Poor scarifying
performance
„
Select a lower working depth.
„
Renew worn blades.
Machine is
not running
smoothly
Machine is
vibrating
„
Damaged blades.
„
Contact a customer service
workshop.
Malfunctions that cannot be rectified using this table
must be attended to by an authorised specialist work-
shop.
Disposal
Do not dispose of worn-out equipment,
spent batteries or rechargeable batteries
in domestic waste.
The packaging, equipment and accessories are made
from recyclable materials, and must be disposed of
accordingly.