GB
20
HTA 36 Li
Maintenance and care
7
MAINTENANCE AND CARE
WARNING!
Danger of cutting injuries
Danger of cutting injuries when reaching
into sharp-edged, moving appliance parts
and into cutting tools.
■
Before maintenance, care and clean-
ing work, always switch off the appli-
ance. Remove the rechargeable bat-
tery.
■
Always wear protective gloves during
maintenance, care and cleaning
work.
■
Do not get the machine wet or expose it to
moisture.
■
Clean plastic parts with a cloth and do not
use any cleaning agents or solvents.
■
Check the electrical contacts for corrosion,
clean with a fine wire brush if necessary and
then spray with a contact spray.
■
Check the cutting blade for damage and – if
damaged – have replaced.
■
Clean the cutting blade and spray with rust-
proofing oil.
8
STORAGE
Thoroughly clean the appliance after each use
and – if present – attach all covers. Store the ap-
pliance in a dry, lockable place out of the reach of
children.
Carry out the following jobs before intervals in
work lasting for longer than 30 days:
■
Clean the cutting blade and spray with rust-
proofing oil.
■
Thoroughly clean the appliance and store it in
a dry place.
9
HELP IN CASE OF MALFUNCTION
CAUTION!
Risk of injury
Sharp-edged and moving appliance parts
can lead to injury.
■
Always wear protective gloves during
maintenance, care and cleaning
work.
Malfunction
Cause
Remedy
Cutting
blade be-
comes hot
when run-
ning. Gener-
ation of
smoke.
No oil on the
cutting
blade.
1. Switch off the
appliance
and remove
the re-
chargeable
battery.
2. Clean and oil
the cutting
blade.
3. Insert the re-
chargeable
battery
again.
■
Cutting
blade is
blunt.
■
Nicks in
the cut-
ting
blade.
Contact an AL-
KO service
centre.
Branches
are not
cleanly cut.
Branches
are often
jammed in
the cutting
blade.
Cutting
blade is
blunt.
Contact an AL-
KO service
centre.
The sliding
play of the
cutting blade
is too great.
Contact an AL-
KO service
centre.
Motor run-
ning, but the
cutting blade
does not
move.
Appliance
faults
Contact an AL-
KO service
centre.
Appliance vi-
brates un-
usually.
Appliance
faults
Contact an AL-
KO service
centre.
Other faults
See "Multitool MT 36 Li – basic
appliance" operating instruc-
tions.
NOTE
For malfunctions that are not listed in this
table or that you cannot resolve yourself,
please contact our customer service.
Summary of Contents for 113374
