10
I
NTRODUCTION
Please read the operating instructions carefully
before you use the domestic water pump to pre-
vent accidents and ensure the trouble-free ope-
ration of the device.
Make sure you keep the instructions at hand for
quick reference. If you resell your pump or give it
to another user, please include these instructions
in the sale or the gift.
The following symbols are used in the instructions:
DANGER
This symbol draws your attention to work
processes or operating procedures that have to
be carefully observed in order to prevent serious
injury to the user or another person.
CAUTION
This symbol draws your attention to information
you need to ensure that your system is not dama-
ged due to improper or careless use.
PLEASE NOTE
The information symbol draws your attention to
essential technical requirements.
F
OR
Y
OUR
S
AFETY
The domestic water pump may only be con-
nected to an electrical device which is com-
pliant with DIN/VDE 0100, Parts 737, 738 and 702
(swimming pools). Make sure that fuse protection
in the form of a 10 A automatic cut-out and a fault
current guard circuit with a nominal fault current
of 10/30 mA is installed.
The supply voltage and current specified
on the type plate must be identical with the
voltage and current of your electrical system.
If you need to connect your domestic water
pump to an extension cord, make sure that
the cable is 3 x 1.5 mm
2
, that it corresponds to
type H07RN-F and is compliant with DIN 57282/
57245. The connector must be splash-proof. Cable
drums must be completely unwound.
Please make sure that the device is not
operated by anyone
– who has not read or does not fully understand
the operating instructions or
– is under the age of 16.
The domestic water pump may not be used
for any other than its designated use. Before
putting the device into operation, make sure that
– the pump, the electric cable and the plug are
not worn or damaged.
Do not operate the device if it is damaged.
Necessary repairs must be carried out in a
qualified AL-KO service centre.
Never use the electric cable to lift, carry or
attach the device to another object. Do not
pull on the cable when unplugging the pump.
Make sure that the pump is unplugged
before beginning any maintenance, repair
or cleaning work. In the event of a malfunction,
immediately unplug the pumpr. Make sure that the
plug does not get wet.
Do not attempt to make any changes or
modifications to the device by yourself. You
may endanger your life or invalidate the warran-
ty.
U
SE
Designated use
The domestic water pump is designed for home
use in your house or garden. Please observe the
technical data given in the instructions before put-
ting the device into operation.
Your domestic water pump has been designed
for use in the following applications:
– irrigation and watering, e.g. of your lawn or
flower and vegetable gardens,
– domestic water supply,
– increasing pressure in the domestic water sup-
ply. Please observe the regulations issued by
your local water works. If necessary, ask a
plumber.
The device is designed to pump only the
following liquids:
– clear water,
– rain water,
– chlorinated water (swimming pools).
GB
Summary of Contents for 110 937
