12
akytec GmbH - Vahrenwalder Str. 269 A - 30179 Hannover - Germany Tel.: +49 (0) 511 16 59 672–0 - www.akytec.de
4.2.1 RS-232 connection type
Fig. 4.2
1. Set the network parameters and click
Apply
to save
parameters to device (
). If the parameters in the
program and in the device are equal, connection will be
established.
2. If the device network parameters are unknown, set the
network parameters in the device and in the program to
default values:
– set DIP-switch
FACT
on the front panel of the device
to
ON
(
);
– click
Default
to set the network parameters in the
program to default values;
– click
Apply
.
3. If you know only the baud rate of the device COM port,
you can use the button
Scan by speed
to find the device
in the network.
4.2.2 Modem connection type
Fig. 4.3
1. Set the modem parameters:
–
Telephone number
(SIM card telephone number
MSISDN);
–
Modem delay
(data exchange latency for mobile
network, 5000 ms recommended);
–
Connection attempts
(maximum number of retries
after connection failure).
2. Set the network parameters.
3. Click
Apply
to save the parameters to device. If the
parameters in the configurator and in the device are
equal, connection will be established.