akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany · Tel.: +49 (0) 511 16 59 672-0 ·
www.akytec.de
2
1 Overview
ITP14 is a universally applicable process indicator and can be used with various current or
voltage standard signals. The device requires 24V DC auxiliary voltage. It is designed for
control and monitoring of industrial processes.
2 Specifications
ITP14 can be ordered in two versions. They
differ in the display color. Ordering key:
Table 2.1 Technical data
Power supply
24 (10…30) V DC
Power consumption, max.
1 W
Input
1
Input signal
0-5 mA, 0(4)-20 mA, 0(2)-10 V
Sampling time
0.3 s
Accuracy
± (0.2% FS + 1 digit)
Temperature influence
≤ 0.2% / 10 °C
Input resistance
0-5 mA, 0(4)-20 mA
≤
120 ohm
0(2)-10 V
≥ 250 kohm
Output
1
Type
NPN transistor
Loading capacity
200 mA, 42 V DC
Enclosure
for panel mounting
Dimensions
48
x
26
x 65 mm
Weight
approx. 30 g
Table 2.2 Linear signals
Display
Input signal
Measurement range, %
0- 5
0-5 mA
0…100
0- 20
0-20 mA
4- 20
4-20 mA
0- 10
0-10 V
2- 10
2-10 V
2.1
Environmental conditions
The device is designed for natural convection cooling. It should be taken into account when
choosing the installation site.
The following environment conditions must be observed:
−
clean, dry and controlled environment, low dust level
−
closed non-hazardous areas, free of corrosive or flammable gases
Table 2.3
Conditions
Permissible range
Ambient temperature
-40…+60 °C
Storage temperature
-25…+55 °C
IP Code
front IP65, rear IP20
Protection class
III
Relative humidity
up to 80% (at +35°C, non-condensing)