background image

 AK-EC-14 - user manual 

/ak-ec-14

www.akyga.com

Short description of the product

The product is compatible with the applicable national and European requirements.

What is in the box?

- AK-EC-14 electric car charger
- Storage Bag

Symbols explanation:

There is a risk of losing health or life (e.g. by electic shock).

There is a particular danger connected with service.

Important tips and information.

Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket 
placed  on  the  product  means  that  the  marked  product  can  not  be  disposed  of  with  other 
household waste. After use, the product must be return to collection point for used electical and 
electronic  equipment  or  to  the  seller.  Appropriate  segregation  of  rubbish  for  subsequent 
processing, recovery or descrution contributes to avoiding negative effects on the environment 
and health, and also allows the recovery of raw materials from which the product is made.

p. 1

The CE standard description on the product is the manufacturer's declaration that the marked 
product meets the requirements of the directive so-called The "New Approach" of the European 
Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change 
in any way. In the reason of using the power supply for other purposes than those described,         
the product may be demaged. The incorrect use may also cause hazard such as short-circuits, 
burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product 
could be share to third partie only with the user manual included.

The Akyga AK-EC-14 is used for charging an electric car via IEC 60309 3-PIN socket. It is compatible 
with all 110-250 V / 6-32 A car models with IEC 62196-2 Type 2 plug and maximum charging power is 
7.2 kW. A set of protectors OVP, OTP, OPP, SCP, OCP and the soft start technology provides safe and 
stable operation of both power supply and charged vehicle. 

The product is adapted to supply voltage of the electrical socket 110 - 250 V.
The power consumption of charging vehicle can not exceed the power supply nominal current.

Ecological Solutions

GREEN

EV charger

The RoHS mark on the product is the manufacturer's declaration that the marked product meets 
the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which 
aims  to  reduce  the  amount  of  hazardous  substances  penetrating  into  the  environment  from 
electrical and electronic waste.

IP Rating

The II protection class device. It provides protection against electric shock against direct and 
indirect contact, and thanks to the additional isolation it is not necessary to connect the device 
case with the protective earth conductor. 

Summary of Contents for AK-EC-14







Reviews: