AK-EC-14 - user manual
str. 4
p. 3
Removing the most common problems
EV charger
Problem
Cause
Solution
The charger does not
work (LEDs do not light)
No voltage
ź
Check if charger is properly
connected to the car charging
port
Problem with the plug
ź
Check if EV charger is properly
connected to the car charging
port
There is a suspicion of a
product defect
ź
Stop using and contact the
seller
Car does not charge
EV charger is not
connected to the car
ź
Connect the charger to the car
Car does not prepare to
charging properly
ź
Check if car motor is turn on
ź
Make sure that the another
charger is not connected to
car’s second charging port
Problem with the plug
ź
Check if the plug is connected
correctly
There is a suspicion of a
product defect
ź
Stop using and contact the
seller
How to use
5. Connect the charger to the electrical outlet (IEC 60309).
9. The charging process will start automatically. The red diode will light up.
10. When the charging process is finished, the charger will automatically turn off. The LEDs will
turn off.
6. Select the appropriate charging current by pressing the button.
8. Connect the other plug to the car's charging port.
1. Check that the charger or cable is not damaged.
2. Make sure the charger has the right type of plug for your car.
3. Turn off the car motor.
4. Check that the power socket is not damaged.
7. Pull the protective cap off the plug.
11. After charging, disconnect the charger from the electrical outlet, then disconnect the plug
from the car's charging port by pressing the button that releases the clip and put the
protective cap on.
