5
© 2015 AKW
14-019-002-08
User
User Operating Instructions
5
User Operating Instructions
1. Temperature Indicator
This digital display is an
indication of the water
temperature inside the unit,
not the outlet tempera-
ture. When the Temperature
Control is adjusted (4), the
target temperature will display
and flash. It will stop flashing
once the desired temperature
has reached its target.
The display may flash again
when it
goes outside the
desired target temperature
(+-2
0
C).
Any slight up or down
fluctuations on the display
during use are normal.
2. Flow Range Indicator
This digital display is an
indication of the current flow
rate setting.
Low
Medium
High
3. Flow Control
Adjustable flow control
4.Temperature Control
Adjustable temperature control
5. Power Button
Push button to power on/off
the shower
Starting the Shower
Switch on the mains power at the isolating switch.
When the power is first turned on, the outer light ring around the
power button will be lit and the shower is in standby mode.
To switch on, press and release the power button, the
temperature and flow rate will be indicated on the display.
To switch off, press and release the power button to stop water
flowing. Your iTherm shower will enter into phased shut-down
mode to allow for the hot water to flow for a short period of time
while the heater cools down before automatically turning off.
1
4
5
2
3
