Here is an example of how the Winch configuration may look like:
And here is an example of how the sensor configuration may look like:
The “reset depht sensor” button configurates the current dephts as the new zero. It is therefore
important to Reset the depth sensor in the surface.
7 .3 SENSOR RESET
In this configuration it is possible to adjust the default speed settings for the winch. Remote is
the control from AKVAconnect4 and local is the control from the local button panel on the winch.
Low and high speed adust the difference in speed between the WinchV5 drums to keep the
camera in approximately the same depth. Low speed is also used when controlling the winch up
and down.
21
21
35
av
