7
Make sure the bases are
correctly adjusted.
1-2mm.
gap
screws
the base
must be
flush
with the
rear edge
of the
rail
Adjust both along and
across.
NB. Make sure there is al-
ways a minimum gap of 25
mm below the bottom rail
Mount the bushing through
the hole in the filter.
Unpack the filters.
Position the shelving unit.
Make sure there is approx.
10 cm between the unit and
the wall. Carefully adjust
all setting screws using a
spirit level.
Lay all bottom shelves in
position.
Fit the filters. The bushing
must face backwards.
The rubber gasket must be
on the outside.
Fit the T-piece to the ac-
companying outlet pipe.
Connect the pipes at the
rear
Mount all T-pieces and
pipes.
Fit the T-piece to the bush-
ing behind the filter.
Use the plug for the final
filter.
Connect all float valves
with the blue hose.
