Akuvox X933H, Manual

Page: 119 / 130

X933H Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com 109
Parameter set-up:

Specific Port : select the specific ports from 1-65535 so that only the dat
a packet from the specific port can be captured. You can leave the field bl
ank by default.

PCAP : click” Start” tab and ”Stop” tab to capture a certain range of data p
ackets before clicking Export tab to export the data packets to your Local
PC.

PCAP Auto Refresh : select “ Enable ” or “ Disable ” to turn on or turn off the
PCAP auto fresh function. If you set it as “ Enable ” then the PCAP will
continue to capture data packet even after the data packets reached its
50M maximum in capacity. If you set it as “ Disable ” the PCAP will stop
data packet capturing when the data packet captured reaches the
maximum capturing capacity of 1MB.
23.3. User Agent
User agent is used for the identification purpose when you are doing analysis
on the SIP data packet. To do this configuration on web Account > Advanced
interface.
24. Device Integration with Third Party