background image

11

Supported models

•  C4-T4T8-xx  8" Tabletop Touchscreen (black or white)
•  C4-T4T10-xx  10" Tabletop Touchscreen (black or white)

Introduction

The Control4® T4 Series Tabletop Touchscreens offer complete 

system control in an elegant, compact, and portable design. The 

touchscreens are equipped with a full capacitive screen, audio 

and video Intercom (with the built-in camera) using SIP, and 

more. 

This touchscreen can be located anywhere, and the convenient 

recharging station enables it to be used as either a tabletop or 

portable interface. The touchscreen uses an AC power adapter 

for power and Wi-Fi for network connectivity.

Note: 

802.11b is not recommended for video intercom. 

We recommend using Wireless-N. See “Specifications” 

for more information.

Box contents

•  Tabletop Touchscreen
•  Recharging station
•  Recharging station power cord

Accessories available for purchase

•  Tabletop Permanent Mount Kit (C4-T4PMNT)
•  T4 Touchscreen Tabletop 8" Base (C4-T4TBS8)
•  T4 Touchscreen Tabletop 10" Base (C4-T4TBS10)

Warnings

Warning! 

This product must be grounded in accordance 

with the National Electrical Code (NEC) requirements.

Avertissement !

 Ce produit doit être fondu selon les 

conditions électriques nationales de code (NEC).

Caution! 

Do not place the touchscreen near sources of 

heat or expose to direct sunlight for an extended time.

Avertissement !

 Ne placez pas l’unité près des sources 

de chaleur ou exposition pour diriger la lumière du soleil 

pendant une période prolongée.

Caution! 

This product generates heat. The room must 

have adequate ventilation or the ability to dissipate heat 

effectively.

Avertissement !

 Ce produit produit de la chaleur. La salle 

doit avoir à ventilation proportionnée ou la capacité 

d’absorber la chaleur efficacement.

Caution! 

Use this product only in dry locations.

Avertissement !

 Employez ce produit seulement dans 

des endroits secs.

Caution! 

Do not use pens or sharp objects to navigate 

or make selections on the touchscreen. To select an item 

or scroll through a list, use your fingertip.

Avertissement !

 N’employez pas les stylos ou les objets 

pointus pour diriger ou pour faire des choix sur l’écran. 

Pour choisir un article ou un rouleau par une liste, 

employez votre bout du doigt.

Caution! 

Improper use or installation can cause 

DAMAGE OF PROPERTY.

Avertissement !

 L’utilisation ou l’installation inexacte 

peut causer DAMAGE DE PROPRIÉTÉ.

Important! 

Using this product in a manner other than 

outlined in this document voids your warranty. Further, 

Control4 is NOT liable for any damage incurred with the 

misuse of this product. See “Warranty.”

T4 Series Tabletop Touchscreens

Installation Guide

Summary of Contents for C4-T4T10-BL























Reviews: