Akuvox C313W-2 Manual Download Page 11

Page: 11 / 114

C313W-2

Indoor Monitor Administrator Guide

AKUVOX SMART INTERCOM www.akuvox.com

3.Introduction to Configuration Menu

Status:

This section gives you basic information such as product information,

Network Information, and account information, etc.

Account

: This section concerns SIP account, SIP server, proxy server,

transport protocol type, audio&video codec, DTMF, session timer, etc.

Network

: This section mainly deals with DHCP&Static IP setting, RTP port

setting, and device deployment, etc.

Phone

: This section includes Time&language, call feature, dial management,

data import&export, door log, web relay.

Contacts:

This section allows the user to configure the local contact list

store in the device.

Upgrade

: This section covers Firmware upgrade, device reset&reboot,

configuration file auto-provisioning, PCAP.

Security

: This section is for password modification, account status & session

time out configuration, as well as service location switching.

Settings:

This section is including the RTSPD & voice assistance setup.

Arming

: This section covers the configuration including, arming zone setting,

arming mode, disarm code, and alarm action.



Mode selection:

Discovery mode

: It is a plug and play configuration mode. Akuvox devices

will configure themselves automatically when users power on the devices

and connect them to the network. It is super time-saving mode and it will

greatly bring users convenience by reducing manual operations. This mode

requires no prior configurations previously by the administrator.

Cloud mode:

Akuvox SmartPlus is an all-in-one management system.

Akuvox Cloud is the mobile service that allows audio, video, remote access

Summary of Contents for C313W-2


















































































































Search results

Summary of Contents for C313W-2

Reviews:

Brands by name

Popular brands

Akuvox C313W-2, Manual

Search results

Summary of Contents for C313W-2

Reviews:

Brands by name

Popular brands