- 15 -
Sleep Timer
By pressing
/
button, select
Sleep
Timer.
The timer can be programmed be-
tween Off and 2 hours in steps of 10 min-
utes by pressing
/
button. If sleep timer
is activated, at the end of the selected time,
the TV automatically goes into stand-by
mode.
Child Lock
You can use this feature to prevent children
f r o m t u r n i n g t h e T V o n o r c h a n g i n g
programmes or adjustments etc. without re-
mote control.
The child lock feature can be set by
/
but-
ton to either
On
or
Off
. When
Off
is selected,
there will be no difference in the operation of
your TV. When
On
is selected, the TV can
only be controlled by the remote control
handset. In this case the control panel but-
tons, except the Power on/off button, at the
rear side of the TV will not work. If one of
these buttons is pressed, “Child Lock On”
will be displayed on the screen.
Language
By pressing
/
button, select
Language.
By pressing
/
button, you can select the
language.
Ext-2 Out
By pressing
/
button, select
Ext-2 Out.
You can set
Ext-2 Out
to
TV, EXT-1, EXT-3,
EXT-4
or
EXT-5
by pressing
/
button.
Note: Only audio output is available for EXT-
3 and EXT-5. The other options have both
audio and video outputs.
Default Zoom
By pressing
/
button, select
Default
Zoom.
You can set
Default Zoom
to
Pan-
oramic, 4:3
or
14:9 Zoom
by pressing
/
button.
If there is no WSS or aspect ratio (picture
size) information and zoom mode is se-
lected as
Auto
by pressing the
“WIDE”
but-
ton, then the zoom mode will automatically
change to Default Zoom setting. See also
Zoom Modes on page 17.
Blue Background
You can set the TV to automatically change to a
blue screen if the signal is weak or absent, or
when there is no input from an external device.
The
Blue Background
feature can be turned
on or off by pressing
/
button.
Menu Background
By pressing
/
button, select
Menu
Background.
You can change menu back-
ground to
Translucent
or
Opaque
by press-
ing
/
button.
Menu Timeout
By pressing
/
button, select
Menu
Timeout.
Press
/
button to change menu
timeout to
15 sec, 30 sec
or
60 sec.
Teletext Language
By pressing
/
button, select
Teletext
Language.
Press
/
button to change
Teletext Language to
West, East, Cyrillic,
Turk/Gre
or
Arabic.
This will normally be set
to West for Western Europe.
Install menu
By pressing
/
button, select the fourth
icon. Install menu appears on the screen.
Program
By pressing
/
button, select
Program.
Press
/
button to select the program
number. You can also enter a number via
ENG-37700W-1062UK-37 INCH 17MB15 OEM-(WO VGA-WO PIP)(HD READY)-50092400.p65
06.09.2006, 15:50
15
