Akura ATL1930W-ID, Instruction Manual

Page: 31 / 31

28
Mains Plug Wiring Diagram
For your own saftty read following instruction before attempting to connect this unit to the mains
supply
MAINS
(
AC
)
OPERATION
The wires in the main lead are coloured in accordance with the following code
:
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug
,
proceed as follows
:
The wire which is coloured green and yellow must be connected to the terminal which is marked with
the letter E
,
or by the earth symbol
,
or coloured green or green and yellow
.
The wire which is coloured blue or black must be connected to the terminal which is marked with the
letter N or coloured Black
.
The wire which is coloured brown or red must be connected to the terminal which is marked with the
letter L or coloured Red
.
For continued protection against risk of fire, replace only with same type and rating of fuse(ASTA
Approved 3A 250VAC fuse)
If your product is fitted with a moulded plug which requires replacement please out off and dispose
of safety
,
then rewire as shown above
.
IMPORTANT
Wall Mounting
The Tv is provided with mounting holes for a VESA approved wall mounting bracket (NOT
SUPPLIED). Remove the Two Posi screws holding the base to the base bracket and lift the base
away (do not remove the base mounting bracket). Mount the VESA bracket using 4x M4 x 10
Iso metric threaded screws (not supplied). Do NOT use screws longer than 10mm, damage will
occur to the internal parts. Fit the wall bracket securely following the manufacturers instructions.
Akura accept no responsibility for damage caused by faulty bracket installation.