3). AUDIO SETUP
4). VIDEO SETUP
5). SPEAKER SETUP
6). DIGITAL SETUP
FUNCTION AND OPERATION EXPLANATION
E-1
6
The setup structure is as follows:
-OP MODE
To select OP mode among LINE OUT, RF REMOD.
-DYNAMIC RANGE
To select the dynamic range between Full to off.
-DUAL MONO.
To select DUAL MONO among stereo, mono L, mono R and Mix mono.
The setup structure is as follows:
-AUDIO OUT
Press the direction button to select the audio out mode you want, then pressing the
ENTER key to confirm it. There are three kinds of audio out mode in this unit: SPDIF/OFF,
SPDIF/RAW and SPDIF/PCM. To set the audio out according to your audio output connection
mode, for instance, if you want the audio out from the SPEAKER terminals, the audio out must
be set to SPDIF/OFF; if you want the audio out from the COAXIAL OUT, it must be set to
SPDIF/RAW or SPDIF/PCM. SPDIF/RAW this means that if the audio input signal from the
disc being playing in this unit is 5.1CH or 2CH, then the audio output is 5.1CH or 2CH. SPDIF/
PCM means that no matter the audio input signal from the disc being played in this unit is
5.1CH or 2CH, the audio output is always 2CH.
The setup structure is as follows:
Press the direction button ( ) to move the slide, you can carry out the BRIGHTNESS,
CONTRAST, HUE and SATURATION setting separately.
The setup structure is as follows:
-DOWNMIX
Use the ( ) buttons to move the scroll and adjust the saturation.
