![background image](http://html1.mh-extra.com/html/akura/aptcdc9903ar/aptcdc9903ar_instruction-manual_2887181008.webp)
DUBBING (DECK B) TO (DECK A)
This unit enables you to duplicate a pre-
recorded tape to another tape by using the
unit-in double deck mechanisms. It is
performed only one way, from the DECK B
(playback) to DECK A (recording).
Dubbing at normal Speed
Note:
Be sure the HIGH SPEED DUBBING switch
is SET AT NORMAL in order to record
at normal speed.
1. Press the POWER switch to ON.
2. Set the TAPE function selector.
3. Insert a pre-recorded cassette into the
DECK B and a blank cassette into the
DECK A.
4. Press the DECK A PAUSE button and
then press the RECORD button.
5. Press the DECK B PLAY button to start
dubbing.
6. Adjust the VOLUME & EXTRA BASS
controls to desired sound level and
sound equalization.
Dubbing at High Speed
This unit is equipped with a HIGH SPEED
DUBBING system which allows duplicating
a pre-recorded tape at approximately two-
thirds the time of the duration at normal
speed.
Slide the HIGH SPEED DUBBING switch,
and follow the same procedure as instructed
in "DUBBING AT NORMAL SPEED".
When dubbing a pre-recorded cassette tape
at HIGH SPEED in TAPE function, a
chattering sound is heard. To avoid this, set
the VOLUME control to a minimum or set
the desired FUNCTION button according to
the source to be heard.
Note:
When the dubbing at HIGH SPEED is in progress,
do not release the HIGH SPEED SWITCH, since
this will vary the speed of the program and ruin the
recording.
7