10
It is possible to program the tracks you wish to play in a sequence of your choice. It is not
possible to enter programs during disc play. Press the STOP button first, then follow the
instructions below.
PROGRAMMING THE TRACK FROM 1 DISC
1. Select the desired disc.
2. Press the MEMORY button. The following information will be displayed on the CD Display.
3. Select the desired track using the Forward and Reverse SKIP/SEARCH buttons.
4. P
5.
6.
ress the MEMORY button.
The first program selection is now stored in the program memory.
Select the next desired track using the Forward and Reverse SKIP/SEARCH buttons.
Press the MEMORY button.
PROGRAMMING THE TRACK FROM MORE THAN 1 DISC
Programming the track from a different disc. Repeat the same procedure 1-4.
Press the No. button to select the next disc.
Repeat procedures 1-4 to program the next tracks.
Continue entering tracks in this way until all the desired tracks are stored.
20 Tracks can be programmed in this way.
Notes:
If the PLAY/PAUSE button is pressed before the MEMORY button is pressed to store a track,
the track will not be programmed and the disc will start playing from the first selected track. Any
track can be programmed to play more than once.
PROGRAMMED DISC PLAY
3 8 P -- 0 1
PROGRAM
DISC
TRACK
Listen to Programmed Tracks
Press the PLAY/PAUSE button.
Disc play will start at the beginning of the first programmed track.
To Clear The Program Memory
If the disc is playing, press the STOP button.
Press the STOP button again until the MEMORY Indicator does not appear.
The program memory will also be cleared if the disc compartment is opened, if the function is
changed, or if the power is switched off.
