11. CAM Module
Using a CAM (Conditional Access Module) (CI Slot).
This feature allows the user to access digital terrestrial “pay per
view” channels. To use this facility a conditional access module
(CAM) and viewing card need to be obtained by subscribing to a pay
channel company.
To insert the module. Ensure the TV is fully disconnected from the
power source.
Insert the CAM into the CI slot with the label facing the front of the
TV (Fig 30). A positive stop should be felt if correctly fitted. DO NOT
force the module.
To release the CAM push the button adjacent to the card and slide
the module away from the TV.
Reconnect the TV and switch on. Select DTV.
Insert your “Pay per view” card. “Do NOT touch the gold contacts”
Press the LCD Menu button and select DTV Setting menu. Select CI
Information and press
►
.
If everything is working ok you will see (Fig 31). press OK. If things
are working Ok you should see the information as in Fig 32.
To check the module is working use the
▲
/
▼
buttons to select
Module Information and press OK, you should now see the
information as in Fig 33
To check the card is working Ok select Smart Card Information and
press OK. Again if everything is ok you will see a list as Fig 34. If the
information is not present, remove the card reverse and reinsert.
This information should now be seen.
Exit the menu’s by pressing LCD menu and you are ready to view
“Pay per view” channels.
To obtain the CAM and pay per view card, these may be purchased
from good high street stores.
Fig 31
Fig 30
Fig 32
Fig 33
19
Fig 34
