QUICK START GUIDE
3
Diagram 1
1.Fit the batteries into the Remote Control (diagram 1.)
Make sure they are the right way round. (See diagram
inside battery compartment).
2. Plug the main aerial of your house into the TV. Plug the TV into
the mains and switch on at the front switch. (diagram 2.) Point
the remote control at the TV and press button No.1.This will bring
the TV onto channel No.1, ready to tune to BBC1.
Diagram 2
3
3.. Press and hold the MENU button (5) for more than 3 seconds.
You will enter the SOUND then OVERVIEW menu. Press the
menu button (5) again to enter the INSTALLATION menu.
4
4.. Use the P- button (7) to move the red bar and highlight
CHANNEL on your screen. You are now ready to tune Channel 1.
5
5.. Press the V+ (8) button on your remote control repeatedly
and observe on the screen the Channel numbers increase one
by one.
6
6.. When a clear picture is found please check your programme
listing to ensure you are receiving BBC1. (If not BBC1 continue
procedure as point 5 above.)
7
7.. Press P- button (7) to move red bar to highlight STORE on your
screen.
8
8.. Press V+ button (8), the word STORED appears on the screen.
Now you have successfully tuned and stored BBC1.
9
9.. Use P+ button (7) to move red bar and highlight
PROGRAMME NUMBER.
1
10
0.. Use V+ button (8) to increase PROGRAMME NUMBER to 2
and repeat steps 5-9. Give a number to each channel as you
find a clear picture like so 1=BBC1, 2=BBC2, 3=ITV, 4=CHANNEL
4, 5=CHANNEL 5.
1
11
1.. Press EXIT button (9) to leave Installation Menu.
065001026300 PT-92 14" SMART 10/2/03 13:19 Page 3
All manuals and user guides at all-guides.com
