8
Basic Operations
First Time Tuning
Once the receiver has been correctly connected, the unit must be tuned by scanning for
available signals when being used for the first time.
Tuning the Receiver for the First Time
When the receiver is powered up for the
first time a welcome screen is displayed.
•
Select English using Up / down keys
•
Press [ OK ] on the remote to tune the
unit.
Tuning takes a few minutes. A progress
bar is displayed at the bottom of the
screen. Please wait.
Once the receiver has completely been
tuned it will automatically display the first
channel.
At this point, tuning is complete and you
can now use your receiver.
If at a later point you would like to retune
your receiver to either add new channels
or to rescan previously deleted channels,
you may do so by following the instructions
in the “Advanced Operations” section.
Note
To learn about other advanced settings such as “Parental Control,” “TV Setup”
“Language,” “Setting your PIN” and “Timer Programming and Recording” refer to
the “Advanced Operations” section.
Akura manual rev.indd 8
15/8/2005 14:52:02