Using Your Digital Picture Frame
Install the stand for tabletop display, or mount to a wall. Connect the AC adapter.
Insert a memory card in the digital picture frame (with the card’s electrical contacts
toward the back of the unit). If the power is off, press the
PLAY/PAUSE
button
to turn the frame on. A slide show will begin automatically.
To pause the slide show, press the
PLAY/PAUSE
button
briefly. The word
Pause will appear on the screen briefly, and the slide show will be stopped. The
current photo will remain on the screen until another button is pressed, at which
time the slide show will resume.
To display the next or previous picture, press the Next button
or the Previous
button
.
The speed of the slide show is automatic. Photos will remain on the screen for
about 5 to 20 seconds, depending on the size of the files. Larger files will take
longer to load.
The
Rotate
button allows photos to be turned for proper viewing.
press this button long time each time to transfer 3 seconds,10seconds,15seconds
playing time
9
Viewing Modes
The
MODE
button
allows the user to adjust how the pictures are displayed on
the screen.
The modes function as follows:
NORMAL
This mode will cause your pictures to fit on the screen with no stretching or
cropping of the images. Photos with a typical 4:3 or 3:2 width-to-height ratio will
have black sections on the left and right sides of the screen.
CROP
This mode will cause your pictures to be enlarged to the full width of the screen,
without stretching them. As a result, the top and bottom of most pictures will not
be visible.
Press MODE button long time to browse several small screen,press
,
to
select and press
to confirm to play.
10
