Akura AI DVD2122, User Manual

Page: 21 / 22

Should you experience problems, please consult the guide below before contacting the Customer help line.
SYMPTOM
Dead.
No Picture. (Splash Screen)
Not Playing discs.
Screen not filled.
Will not SKIP or SEARCH
No Sound.
No Remote Control Functions
High incident light shining on
window of player
Ensure no direct sunlight is on
the R/C window.
Batteries low
Object in path of signal
Replace batteries.
Ensure the Remote control can
be seen by the player.
POSSIBLE CAUSE REMEDY
No power to the player.
Player not turned on.
No connection to Tv
TV input not selected
Disc rating incorrect.
Moisture on the DVD Lens
Disc damaged
Player not set to disc correctly
Disc has no chapters.
Opening titles and Warning
Connections to Tv not correct
Incorrect region
Disc incorrectly placed
Connections to External
Amplifier not correct
External Amplifier not turned on.
Check the connections to the
mains supply
If you are still having difficulty please call the Technical help line. Ring 01422 263313 (Normal rates apply).
Opening hours Mon-Fri 8 am 8pm. Sat 9 am 4pm. Sun 11am 4pm “Bank holidays as Sun”
Or try our website :- www.ekey.co.uk (24Hr) Emails should be responded to within 3 - 4 hours should the
consumer have difficulty getting through.
Press POWER Button in.
Press OPEN/CLOSE to confirm
power is getting to player.
Check connections to Tv ensuring SCART
plug “if used” is plugged in fully at both
ends.
If the Tv does not automatically select the
DVD player, see your Tv user manual to
select the SCART input.
This player is set to Region 2
Ensure the disc is placed label side up.
Set the player to the correct
rating for the disc.
Condensation on the DVD lens can be
removed by allowing the player to warm
up 1-2 hrs.
Check disc for damage
Enter SETUP menu. Select
another screen format.
Some discs have no “Chapters”.
Most discs will not SKIP when WARNING
and Opening titles are shown.
Check SCART lead if used, or other
audio lead connections.
Check connections to External amplifier.
Ensure External amplifier is turned on
and the correct input is selected.