Connectors descriptions:
① ：
DC 12v power input for the LCD TV, connect power supply adaptor here.
② ：
Scart input interface, connect your AV system/DVB “freeview” to the Tv.
③ ：
Audio input for VGA mode, connect to your PC audio output.
④ ：
DB15 VGA interface, connect your PC output to this connector.
⑤ ：
Left Audio Channel input for Composite video & S-video mode.
⑥ ：
Right Audio Channel input for Composite video & S-video mode.
⑦ ：
CVBS
/
Composite video inputs, from your VCR or other AV system.
⑧ ：
S-VIDEO input, connect a video input from an external device that supports S-Video.
⑨ :
75
Ω
aerial input, connect aerial lead here to receive cable / aerial signals.
TV input signal.
1. Antenna /
75
Ω
aerial input.
2.
DC 12V power input.
Connection steps
：
Make sure that the power of the LCD-TV is off;
Connect an antenna cable (CATV) to (1) (75
Ω
ANT) on the
back of the LCD-TV. Connect the other end of the antenna cable to
the antenna connector on the wall or on your digital cable / satellite
receiver. Now you are able to view “off air” or cable TV;
Turn on the power of the LCD-TV;
Press the INPUT button to set the video input mode of the LCD-TV
to “TV” mode. The channel number appears in the top left side of the
screen;
You can use key CH + / CH - button or the number keys on the remote control to select the
channel you want to watch;
Page 7
7. Connectors (Input / Output)
①
②
③
④
⑤
⑥
⑦
⑧
⑨
