background image

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT  SAFEGUARD

FIRE AND SHOCK PRECAUTIONS

Adequate ventilation must be provided to prevent heat build up inside unit. Keep the inside of unit free

 

from foreign objects, such as hairpins, nails, paper, etc. Do not build the set into a bookcase or other

 

enclosures in which it would be poorly ventilated. Do not place it on carpet or a bed as low ventilation 

 

boles could become obstructed.

Do not set liquids, including flower vases and vessels filled with chemicals or water etc., On top of the 

 

unit as liquid could get inside the unit. If a hazardous object falls inside the TV set, unplug it immediately

 

and call a qualified technician for removal.

When placing or moving the TV set, take care to insure that the power cord is fitted into the allocated slot. 
To avoid damage to the power cord, never allow heavy objects such as the TV set itself to be placed on 
 the power cord. Keep cord away from radiating appliances. Do not allow cord to become knotted or
 tangled. Do not lengthen the cord. When removing the power plug from the socket, always hold onto the
 plug, never pull by the cord.

WARNING

Do not remove the back cover of the TV set. Accidental contact with high voltage components could result

 

in electric shock. When internal adjustment is necessary, please contact your distributor.

If your set produces sound but no picture, or it emits smoke or produces a strange sound or smell, continue

 

operation is dangerous. Immediately turn off power and remove the power plug from the socket and 

 

contact your distributor. 

During vacation or other occasions when you will not be using the set for an extended period, remove the 

 

power plug from the socket.

This appliance should not be operated by children or infirm persons without adequate supervision.

- 1 -

This TV set shall be connected to a main socket outlet with a protective earthing contaction

The main plug and main switch should be remain readily operable after installation

No nacked flame sources,such as lighted ca dles, should be placed on the apparatus

Minimum distances around the apparatus for sufficient ventilation

The use of apparatus in moderate climates

CAUTION

CAUTION: 

TO REDUCE THE RISK OF ELEC-

                       TRIC SHOCK, DO NOT REMOVE
                       COVER(OR BACK).NO USER-
                       SERVICEABLE PARTS INSIDE.
                       REFER SERVICING TO QUALIFIED
                       SERVICE PERSONNEL.
                   

The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.  

'

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of  important
operating and maintenance( servicing ) instructions in 
the literature accompanying the set. 

Summary of Contents for AH260LCD




















Reviews: