background image

2

SAFETY INFORMATION

CAUTION:
DVD/CD PLAYER IS A CLASS 1 LASER
PRODUCT. HOWEVER, THIS DVD/CD
PLAYER USES A VISIBLE LASER BEAM
WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED. BE
SURE TO OPERATE THE DVD/CD PLAYER
CORRECTLY AS INSTRUCTED.
WHEN THIS DVD/CD PLAYER IS PLUGGED
TO THE WALL OUTLET, DO NOT PLACE
YOUR EYES CLOSE TO THE OPENING OF
THE DISC TRAY AND OTHER OPENINGS
TO LOOK INTO THE INSIDE OF THIS
PLAYER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT
REPAIR BY YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PLAYER TO RAIN OR MOISTURE

THIS PRODUCT CONTAINS A
LOW POWER LASER DEVICE.

SAFETY  PRECAUTIONS

Placement

Set the unit up on an even surface away from direct
sunlight, high temperatures, high humidity, and
excessive vibration. These conditions can damage
the cabinet and other components, thereby
shortening the unit’s service life.

The apparatus shall not be exposed to dripping
or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.

AC mains lead protection

Ensure the AC mains lead is connected correctly
and not damaged. Poor connection and lead damage
can cause fire or electric shock. Do not pull, bend,
or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead.
Pulling the AC mains lead can cause electric shock.
Do not handle the plug with wet hands. This can
cause electric shock.

Foreign matter

Do not let metal objects fall inside the unit. This
can cause electric shock or malfunction.
Do not let liquids get into the unit. This can cause
electric shock or malfunction. If this occurs,
immediately disconnect the unit from the power
supply and contact your dealer.
Do not spray insecticides onto or into the unit. They
contain flammable gases which can ignite if sprayed
into the unit.

Service

Do not attempt to repair this unit by yourself. If
sound is interrupted, indicators fail to light, smoke
appears, or any other problem that is not covered
in these instructions occurs, disconnect AC mains
lead and contact your dealer or an authorized service
center. Electric shock or damage to the unit can
occur if the unit is repaired, disassembled or
reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from
the power source if it is not to be used for a long
time.

Akura.p65

3/11/04, 12:45 PM

2

Summary of Contents for ADV148S




















Reviews: