42 www.AkuaInks.com
Problem:
Dark and light areas of ink appear on plate/print.
Cause:
The brayer loses ink after rolling out the length of its
circumference.
Solution:
Recharge the brayer with ink multiple times while
rolling up. Use a light table when rolling up, or hold the plate
up to a light source to see if the plate is coated evenly before
printing.
Problem:
Texture of paper comes through on print.
Cause:
The paper is too grainy or the ink application is too
thin.
Solution:
Dampen the paper before printing, use smoother
paper or add a heavier application of ink. NOTE: When printing
with an etching press, the ink should sit flush with the surface of
the plate. With the Pin Press, the ink should sit slightly above the
surface of the plate.