Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
Email: [email protected]
Instructions for use
1. Before use
Carefully remove the humidifier from its packaging box and remove all protective
packaging. Place the humidifier on a firm, level surface that provides sufficient space
for the unit and the user. Give the humidifier about half an hour (to adjust to the room
climate) before operating it for the first time.
2. Commissioning
2.1. Remove the water tank by pulling straight up on the handle. Unscrew the twist cap of
the water tank and fill it with clean and clear water. Then put it back in place, making
sure that the water tank is correctly seated and that the water can drain easily into the
collection basin.
Note: Always use only water with a temperature below 40°C !
Wait briefly for a minute so that the water can distribute well in the lower part of the
humidifier.
2.2. Plug the mains plug of the appliance into a mains socket.
2.3. Now turn the operating switch to the right to start humidification operation.
OFF
= OFF
HIGH
= Full operating level
LOW
= Low operating level
2.4. Turn the operating switch completely to the left again (OFF) to end humidification
operation.
3. Cleaning & Storage
3.1 Preparation for cleaning
Please switch off the appliance first and disconnect the mains plug before cleaning the
humidifier.
Remove the water tank and the fan housing by pulling them both vertically upwards
and thus detaching them from the base plate.
Now unscrew the water tank and empty it and the collection basin completely of any
residual water.
