Aktobis WDH-C03 User Manual Download Page 3

 

Aktobis AG,  Borsigstr. 20,  D-63110 Rodgau / Germany 

www.AKTOBIS.de

 

Email: [email protected] 

 
 
 

Important safety instructions: 

 

 

Operate the unit only in a straight position and with a straight/level stand ! 

 

Ensure a minimum lateral distance of 30 cm and a minimum upper distance of 30 cm to inventory and 
walls!  

 

Do not place any objects on top of the unit and make sure that the air intake as well as the exhaust air are 
always free ! 

 

The appliance is not a substitute for room ventilation and is not suitable as an extractor hood when 
cooking. 

 

Ventilate the room regularly. Especially if it is a very airtight room or if there is a high oxygen consumption 
(e.g. fireplace, gas stove, many people, etc.). 

 

Supervise the air purifier if there are children or animals near the device ! 

 

This air purifier should only be operated by persons who have the necessary physical as well as mental 
abilities to operate this device without problems/flawlessly ! 

 

Pay attention to the electricity, never go into the device with objects or put them in ! 

 

Only qualified personnel or electricians are allowed to open the unit or to make repairs on the unit and/or 
the power cord (power plug) ! 

 

Protect the device from all moisture and wetness ! 

 

Use only the recommended voltage for the operation of the device ! 

 

Make sure that the power cord is unfolded (untied) before connecting it to the power  

 

Make sure that the plug is clean and properly connected to the power outlet before operating the unit ! 

 

Do not expose the filters to insect spray, they could later release/release the insect spray unintentionally ! 

 

Avoid that ash (cigarette ash) is sucked in by the device, this can lead to fire in the worst case ! 

 

Switch off the device before unplugging the power cord ! 

 

Switch off the device and disconnect the power plug if you want to clean the device ! 

 

Clean the device only with mild cleaning agents ! 

 

Avoid using the device at high room temperatures or in humid conditions ! 

 

Do not make any independent modifications to the device or the cables ! 

 

Never touch the plug or the socket with wet hands ! 

 

Make sure that flammable substances (e.g. gases/oils etc.) are never in the vicinity of the device ! 

 

If you are not going to use the device for a longer period of time, switch it off and disconnect the power 
plug! 

 

Never look directly into the switched on UV light, it can cause injuries to the eye ! 

 
 

Please switch off the device immediately and remove it from the power/mains if something seems to be 
wrong !!! In this case, please contact a specialist and do not try to repair the device yourself !! 

 
Examples:

 Fuse has blown or the unit is making unusual noises and/or there is a burnt smell. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for WDH-C03













Reviews: