Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
Email: [email protected]
6.) Sleep mode
Press and hold the power button for 5 seconds to activate sleep mode. The unit will
run in level 1 and all lights will turn off. Press any button to exit sleep mode.
Notes for the filters:
1. With an average use of approx. 8 hours per day, the filters last up to one year!
In more heavily soiled rooms, e.g. smokers' households, the filters may have to
be replaced after approx. 4 - 6 months.
2. Change the main filter when it is dirty. You can see this by opening the rear
filter panel. If the previously snow-white filter side is now dark brown, black or
smeary yellow, the main filter should be changed. In addition, the air purifier
indicates when the filter should be changed by a flashing operating power
button.
3. Then (after changing the filter) press and hold the timer button for 5 seconds
during operation to "reset" the unit.
A sound confirms the reset. Never wash the main filter!
Technical data:
Voltage:
220 ~ 240V / 50Hz
Power consumption:
6 W
Air circulation:
Stage 1 ( I ) ~ 55
m3/h
Stage 2 ( II ) ~ 75
m3/h
,
Stage 3 ( III ) ~ 100
m3/h
Recommended area of use:
up to 15
m2
Anion output:
5 x
106
anions/cm3
Dimension (H/W/D):
245 x 303 x 133 mm
Weight:
1.6 kg
For the technical data, deviations are reserved !!!
Troubleshooting:
The unit itself emits an unpleasant odour:
The UV lamp produces a certain odour. This odour is typical of its function and
generally arises during its operation.
The anion function cannot be smelled by most people. However, sensitive people
perceive a certain "smell". This is because the anions slightly electrostatically
charge the air (similar to after a thunderstorm).
FINALLY, A NEW AIR CLEANER STILL HAS A LIGHT OWN Smell (fresh plastic,
new engine, new paint, etc.). HOWEVER, THIS NEW SMELL DISSIPATES
WITHIN A VERY SHORT TIME !!!
