CAUTIONS BEFORE USE
The working environment
·
Keep the unit 30cm or more from the wall or funiture.
·
Keep the unit 1 meter or more from the TV or computer.
Installation of the filters
(1)
(2) Take out the HEPA, activated carbon and photo catalyst filter, tear off the protective
bag and install it.
Take off the cover of filter on the back panel.
Take off filter cover
Install HEPA, activated
carbon and photo catalyst
Power setting
Be sure to
use a ground
Disassembly and installation of the cover
Diagram of disassembly:
Press the place of button on the
filter cover through thumb or first
finger, then open the cover.
Press place of button
Disassembly cover of filter
close filter cover
Set fixing place into fixing slot
Diagram of installation:
Please set the two fixing points of
the filter bottom into the fixing slot
of unit, then close the filter cover.
Installation is finished when you
hear the clear voice ”KA”.
7
Please do not connect to the wrong rated power supply, insert the plug firmly into the power socket.
socket.
Function setting
(1). The unit will start to work while turn the rotary button to right side, the power LED
will light. There are three fan speeds avilable, high, medium and low.
(2). HEPA, activated carbon, photo catalyst, UV lamp and ion are normal functions.
Once the unit is turned on, all these functions are working.
Power
Off
Low
Medium
High
8
Power
Off
Low
Medium
High
Power
Off
Low
Medium
High
Power
Off
Low
Medium
High
Low
Medium
High
OPERATING INSTRUCTION
