www.aktiv-wheelchairs.com
1.0 General Information about your Wheelchair
1.1 Major Components of your Wheelchair
MAX. USER
WEIGHT
130kg
50cm seat: 440mm-490mm
45cm seat: 410mm-440mm
40cm seat: 340mm-360mm
Designed to fit
user height range
1470mm -1880mm
Fig. 5
Fig. 4
Operating instructions
The X7 Comfort Wheelchair is a modern, practical, stable, durable, with good heavy resistance,
multifunctional and comfortable wheelchair. It is suitable for people with disabilities and for elderly people
with nursing and transport purposes.
The Comfort Wheelchairs are basically assembled before selling. It is only needed to proceed with simple
installation and adjustment of some movable accessories.
1. Check the content of the box to see whether the accessories, user manuals, etc, are complete. If not,
please contact your seller or the manufacturer.
2. Open the box and take out the wheelchair from the box. Place the wheelchair on the ground. Push down
the wheelchair seat until the wheelchair is completely opened and extended ready for use. Put down the
both side boards from right and left side to their normal use position.
3. Installation of adjusting cylinder: There are two adjusting cylinders, one is for adjusting the reclining
angle of the backrest and the other is for adjusting the reclining angle of the seat. The angles can be
adjusted according to every user for his/her comfort.
3.1 Installation of backrest adjusting cylinder: The backrest adjusting cylinder is located at the back of the
wheelchair. Align the positioning hole of the adjusting cylinder to the fixing film hole and place the bolt
through the hole.
Note: after placing the bolt through the hole, assure that the two hoodles from the front of
the bolt are popped out to prevent the bolt from falling.
3.2 Installation of seat adjusting cylinder:
The seat adjusting cylinder is located at the back of the
wheelchair. Align the positioning hole of the adjusting cylinder to the fixing film hole and place the bolt
through the hole.
Note: after placing the bolt through the hole, assure that the two hoodles from the front of
the bolt are popped out to prevent the bolt from falling.
4. Installation and adjustment of footrest: Align and mount the arc plate hole of the leg support into the
pin. Rotate gently the leg support from outside to inside until the spring is fixed. If it is necessary to remove
the leg support, push the spring lock from the inner side of the leg support, twist it outwards until certain
angle and elevate it to pull out from the frame pin.
5. Installation and adjustment of side boards and armrests: Loosen the armrest fixing triangle bolts, plug
the square tube of the armrest into the square hole of the wheelchair frame, then tighten clockwise the
armrest fixing triangle bolts. Plug the armrest tubes into the armrest fixing square tubes, adjust to the
suitable height and tighten clockwise the triangle bolts. Adjust the side boards to the suitable height and
tighten clockwise the triangle bolts to secure the side boards.
6. Installation and adjustment of headrest: Take out the headrest set from the box. Plug the square tube of
the headrest into the wheelchair frame's square tube located at the back of the backrest. Adjust to the
suitable height and tighten clockwise the triangle screw bolts to fix the headrest set.
Loosen the wrench bolts from the headrest folding blocks. Adjust forward or backwards the headrest to
the suitable position. Tighten clockwise the wrench bolts to fix the headrest. The user may adjust the
movable blocks of the headrest according to his/her preferences. Adjust the movable blocks to the suitable
position and tighten the wrench bolts to fix the headrest.
7. Installation and adjustment of lateral supports: The shoulder stoppers can maintain and protect
the
body posture. The height of the shoulder stoppers and the distance between them can be adjusted
according to the body of the user. Adjust to the suitable position and tighten clockwise the triangle wrench
bolts.
