www.tmatlantic.com
4
3. This item has sleep function. When you put the air
pump on the racket, the item will stop heating, And
the display shows“SLP”( means SLEEP) , when you pick
up the air pump , the Item will get back to the set
temperature.
2.3 How to use
•
Before use, please check if the product voltage
conforms with the local voltage.
•
Connect the mains plug to a socket.
•
Assemble the nozzles into the position( try to use
nozzles with bigger diameter).
•
Turn on the power switch, set the air flow rate and
temperature, and put the unit on the racket.
•
Put the nozzle on the pins of the IC( do not touch
directly), so that the hot air can melt the Solder tin
on the IC pin, and then use the tweezers to
remove the IC.
After operation, turn off the power switch, then pull
out the power plug and put the unit in a safe place out
the reach of children.
