www.tmatlantic.com
3
5. CAUTION!
5.1 The power cord only can be inserted in approved power sockets or adapters.
5.2 High Temperature
The temperature of the soldering tip or the nozzle will reach as high as around 400
°
C (752
°
F) when the power switch
is on. Since mishandling may lead to burn and fire, be sure to comply with the following precautions:
– Do not touch metallic parts near the soldering tip/ nozzle.
– Do not use this system near the flammable items.
– Advise other people in the work area that the unit can reach a very high temperature and should be considered
potentially dangerous.
– Turn off the power switch while taking breaks and when finishing using.
– Before replacing parts or storing the system, turn off the power and let it cool down to the room temperature.
Warning: this tool must be placed on its stand when not in use.
A fire may result if the appliance is not used with care, therefore
----be careful when using the appliance in places where there are combustible material;
----do not apply to the same place for a long time;
----do not use in presence of an explosive atmosphere;
----be aware heat may be conducted to combustible materials that out of sight;
----place the appliance on its stand after use and allow it to cool down before storage;
----do not leave the appliance unattended when it is switched on.
5.3 take care of your tools
Do not use the tools for any applications other than soldering or desoldering.
Do not rap the iron/gun against the work bench or otherwise subject the iron to severe shocks.
Do not file the soldering tip to remove the oxide, please wipe the tip on the cleaning sponge.
Use only accessories or attachments which are listed in the operation manual. Use of other tools and other ac-
cessories can lead to a danger of injury.
Please turn off the power before connecting or disconnecting the soldering iron.
5.4 Maintenance
Before further use, safety devices or slightly damaged parts must be carefully checked for error-free and intended
operation. Inspect moving parts for error-free operation and that they don’t bind, or whether any parts are damaged.
Damaged safety devices and parts must be repaired or replaced by a qualified technician, so long as nothing else is
indicated in the operation manual. Use only accessories or attachments which are listed in the operation manual. Use
of other tools and other accessories can lead to a danger of injury.
5.5 Keep children at a distance
Warning: this appliance is not intended for use by young children and infirm persons unless they have been
adequately supervised by a responsible person to ensure that they can use the appliance safely
Warning: Young children should be supervised to ensure that they do not play with the appliance.
Unused soldering tools should be stored in a dry location which is out of the reach of children. Switch off all unused
soldering tools.
5.6 Protect yourself against electrical shocks
Avoid touching grounded parts with your body, e.g. pipes, heating radiators and so on. The grip of antistatic de-
signed soldering tool is conductive.
5.7 Work environment
Do not use the soldering tool in a moist or wet environment. The soldering iron and the hot air gun should be placed
on the holder after finished using.
5.8 Observe the valid safety regulations at your work place.
